The War Could Not Have Been Won Without This Wonderfully Simple Piece Of Design – The Humble Bailey Bridge

A heavily camouflaged Sherman tank crosses a Bailey bridge over the River Santerno near Imola.
A heavily camouflaged Sherman tank crosses a Bailey bridge over the River Santerno near Imola.

Picture an Allied tank commander in Europe, during Autumn, 1944. Advancing for days, destroying the German resistance. Nothing has been able to stop the invasion; except a blown bridge. Luckily, somewhere back in the supply columns which keep the army going, is a Bailey Bridge.

Donald Bailey, the designer of the Bailey Bridge, was born in Rotherham, in 1901. He received his BA in Engineering from the University of Sheffield in 1923. After graduating, he helped design railway bridges in the 1930s, but by 1940 he was working for the War Department.

In Christchurch, Southern England he and a group of other engineers, comprised MEXE (Military Experimental Establishment). They were designing and testing new engineering equipment for the British Army.

The Army at the time was facing a dilemma. They knew they would be required to fight in Europe, with its various canals, rivers, streams, and lakes. Any one of these could stop an army advancing, and they needed a foolproof way to cross them.

Collapsible and portable bridges had been around for hundreds of years, in various forms. By 1940, however, British weapons were outstripping engineering equipment.

Their tanks weighed more than 40 tons, but the heaviest portable bridge could hold only 26 tons. The Allies would be bogged down and delayed as engineers worked to repair existing bridges or build more permanent ones.

A Bailey Bridge like this had to be constructed over the Son. This took precious time, but was eventually able to allow XXX Corps to continue their advance.
A Bailey Bridge like this had to be contructed to cross rivers. This took precious time but was eventually able to allow XXX Corps to continue their advance.

 

Donald Bailey was being driven back to his headquarters building after a failed bridge test. The world seemed to be collapsing around England, and everything they tried seemed to fail. The War Department was desperate for a reliable bridge. Suddenly, Bailey had an idea. He began sketching it out on the back of an envelope.

Engineers slide a Bailey Bridge section into place, almost every part of the bridge construction was done by hand. The only time heavy equipment was used was to lift pieces into high places. Image Source:
Engineers slide a Bailey Bridge section into place, almost every part of the bridge construction was done by hand. The only time heavy equipment was used was to lift pieces into high places.

It was an amazingly simple design. Prefabricated panels each made up of internal trusses. These were joined by pegs, with large beams running across the bridge’s width. This gave them not only the rigidity needed to span a large area, but they could be assembled with simple tools: sledgehammers, rollers, and wrenches.

A destroyed Bailey Bridge and tank in Italy. While not indestructible, the bridges were easily replaced and cheap. They proved sturdy enough to stand up to almost any stress, but quick and cheap enough to be disposable.
A destroyed Bailey Bridge and Sherman tank in Italy. While not indestructible, the bridges were easily replaced and cheap. They proved sturdy enough to stand up to almost any stress but quick and cheap enough to be disposable.

Equally important, they were straightforward and cheap to produce. Almost any industrial fabricator could make the panels and pieces necessary, and mass production was a definite possibility. The Bailey Bridge had been born.

An M10 tank destroyer crosses the bailey bridge near Son.
An M10 tank destroyer crosses the Bailey Bridge.

In the battlefield these bridges proved indispensable. Field Marshal Montgomery said they were necessary to the speed of the Allied advance during the war. In Italy and Sicily, over 55 miles of bridges were built, spanning everything from stream beds, to the 1,126 ft. Bridge over the Sangro River. The longest, which spanned the Chindwin River in Burma, was 1,154 ft.

After D-day, in France, the low countries, and Germany, Bailey Bridges were consistently used to replace many of the bridges destroyed by the retreating Germans. Famously, the Son bridge was replaced with one during Operation Market Garden, in September 1944; eventually allowing Allied armor to press forward and help seize Nijmegen.

A bailey section in a memorial in Christchurch. The local proving grounds in the Stanpit Marshes saw the development of much of the engineering equipment of WW2.
A Bailey section in a memorial in Christchurch. The local Stanpit Marshes saw the development of much of the engineering equipment of WW2.

Today Bailey style bridges are a fixture of almost any modern military. The materials have been upgraded, but the basic design, prefabricated, interlocking sections which can be put together a myriad of ways, has not changed.

Their use has expanded to the civilian life, where they are often used for disaster relief and are permanent fixtures in some areas. Bailey might not be the best-known hero from World War 2, but his contribution to the war effort was immense, and his memory, and legacy, can not be forgotten.

Gabe Christy

Gabe Christy is one of the authors writing for WAR HISTORY ONLINE